bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Lincoln Mark LT


  • How to Determine Axle Placement on a Custom 5 x 9 ATV and Motorcycle Trailer
  • When determining the axle placement on a trailer, an important factor to consider is the tongue weight. You want the tongue weight of the trailer to be approximately 10 percent of the gross trailer weight. Moving the axle rearward will increase the tongue weight of the trailer. A heavy tongue weight could cause issues with traction and sway when towing, but that is not as much of a concern on smaller trailers than it is on larger travel trailers or enclosed trailers. First, we want to...
    view full answer...

  • How to Determine How Much Air Pressure to Install in Firestone Ride Rite Bags
  • The Ride Rite Kit you would have installed on your 2006 Lincoln Mark LT would be our part # F2350. The amount of air pressure you will need will require you to do a bit of trial and error. I would recommend you load truck up and then keep inflating the bags till the suspension sits as level as it does when unloaded. That will be the ideal pressure for all situations. You always want to keep a minimum of 5 psi in the bags to prevent them from prematurely wearing out. This ensure the bags...
    view full answer...

  • Video Request On How Roadmaster Quick Disconnects Attach and Detach
  • If you fast forward to the :40 second mark of the install video I attached it will show you how the quick disconnect of the part # BX88178 would disconnect and connect from Roadmaster base plate kits like part # 495-1A.
    view full answer...

  • Solution for Trailer that Sags When Generator is In Truck Bed when Using Weight Distribution
  • The Timbren kit part # TFR150D is going to give you additional suspension support to help out with the weight of your generator, but the ideal solution will be to add more spring bar tension to your weight distribution system. If you can try angling the spring bars further down or use fewer links on chain hangers to see if that helps.
    view full answer...

  • Front Mount Trailer Hitch Receiver for a 2006 Lincoln Mark LT
  • The installation instructions for Curt front mount receiver # 31352, see link, do not specify any vehicle modification for installation on your 2006 Lincoln Mark LT. But it is always possible that some trimming of an air dam or fascia may be needed on some models. We also have Draw-Tite hitch # 65043 which should not require any modification. The receiver will sit below the front fascia. I have linked videos and instructions for both hitches for you.
    view full answer...